Create a Non-Table Shape

Create a Non-Table Shape

Non-Table Shapes can be used to fill out and clarify a floor plan. New non-table shapes are created in the FullCount Back Office then added to a floor plan on the Touchscreen. To create a non-table shape, follow the steps below:

*NOTE: Unlike tables, non-table shapes can be added multiple times to the same floor plan. For example, if a dining room has four large pillars, a single Pillar shape can be created then added four times to the same floor plan.
 

  1. Select the Admin Center button.
     
  2. Select the Tables tab.
     
  3. Choose the Shapes subtab.
     
  4. Click the New Shape button.
     


 

*NOTE: Fields with an asterisk (*) are required.

  1. Fill in the desired specifications for the new table.
  • Name* – Choose how this shape will be identified in the Back Office and from the Edit Floor Plan screen.
  • Shape Type* – Select between the Circle, Diamond, Rectangle, or Square options.
  • Shape Purpose* – For a non-table shape, select Object.

*NOTE: Select Table to create a new table shape. This shape can then be applied to New Tables.

  • Default Height* – Choose a default height in pixels for this new non-table shape.
  • Default Width* – Choose a default width in pixels for this new non-table shape.

*NOTE: An objects height and width can be manually adjusted from the Touchscreen.

  • Screen Description – Optionally, enter any text that should appear to servers on the object from the floor plan. This field can be used as a label on the non-table shape.
     


 

  1. Click Save and Close.

The new non-table shape is now created. See the Knowledge Base article Modify a Floor Plan to add the non-table shape to the Touchscreen.


    • Related Articles

    • Create a Floor Plan

      Floor Plans allow servers to assign customers to a table using a visual layout of the dining venue. New floor plans are usually create from the Touchscreen, but they must be attached to an existing table area and have tables created beforehand from ...

    • Create a Table

      Assigning customers to different Tables allows servers to track and manage multiple orders. New tables are created in the FullCount Back Office then added to a floor plan on the Touchscreen. To create a new table, follow the steps below: Select the ...

    • Create a Table Area

      Table Areas are groups that tie related tables and floor plans to a specific department within FullCount. Because most departments only require one, new table areas are only needed when a new department is created. Create a new table area using the ...

    • Modify a Floor Plan

      On occasion, a community will need to adjust a Floor Plan. Most changes to a floor plan, whether small or large, will be made from the Touchscreen application. *NOTE: To create an entirely new floor plan, see the instructions HERE. Before modifying a ...

    • Create A Menu

      In FullCount, items are organized into Menus. Menus appear as buttons on the left side of the Touchscreen application but, like items, are created in the Back Office. After a menu has been created and filled, it must be added to a department to ...